更新 quilibrium_for_dummies.sh

qClientVERSION="2.0.0.2"

README.md

@@ -6,9 +6,8 @@ This script is an all-in-one quil usage software for newcomers.
 
 For installation and first run, please run
 
-    wget https://raw.githubusercontent.com/0xOzgur/QuilibriumTools/main/quilibrium_for_dummies.sh
-    chmod u+x quilibrium_for_dummies.sh
-    ./quilibrium_for_dummies.sh
+    rm -f quilibrium_for_dummies.sh && wget https://raw.githubusercontent.com/0xOzgur/QuilibriumTools/main/quilibrium_for_dummies.sh && chmod +x quilibrium_for_dummies.sh && ./quilibrium_for_dummies.sh
+
 
 After first run, when you need to reach your node, you need to run only;
 
@@ -18,8 +17,7 @@ After first run, when you need to reach your node, you need to run only;
 
 **Autoinstaller Script for Quilibrium as a Service**
 
-
-Use below command to install v1.4.21.1
+Use below command to install v2.0
 
 
     wget -O - https://raw.githubusercontent.com/0xOzgur/QuilibriumTools/main/install/install_quilibrium_service.sh | bash
@@ -27,7 +25,8 @@ Use below command to install v1.4.21.1
     
 **Autoupdater**
 
-If you need to update your node from previous version to 1.4.21.1, apply below command
+
+If you need to update your node from previous version to 2.0, apply below command
 
 
     wget -O - https://raw.githubusercontent.com/0xOzgur/QuilibriumTools/main/update/update.sh | bash

configuration/config.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 
 # Step 0: Welcome
-echo "This script is prepared by 0xOzgur.eth"
+echo "This script is prepared by 0xOzgur"
 echo "Enjoy and sit back while you are configuring grpCurl for Quilibrium Ceremony Client!"
 echo "Processing..."
 sleep 10  # Add a 10-second delay

configuration/config_docker.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 
 # Step 0: Welcome
-echo "This script is prepared by 0xOzgur.eth"
+echo "This script is prepared by 0xOzgur"
 echo "Enjoy and sit back while you are configuring grpCurl for Quilibrium Ceremony Client!"
 echo "Processing..."
 sleep 10  # Add a 10-second delay

increment_watch.sh

@@ -0,0 +1,196 @@
+#!/bin/bash
+
+# Terminal clearing function
+clear_screen() {
+    clear
+    echo "Log Monitoring Active - Press Ctrl+C to exit"
+    echo "___________________________________________________________"
+}
+
+# Global variables
+last_increment=""
+last_change_time=$(date +%s)
+last_decrease_time=$(date +%s)
+CHECK_INTERVAL=5  # Check interval (seconds)
+RESTART_THRESHOLD=$((5 * 60))  # 5 minutes (in seconds)
+RESTART_WAIT_TIME=$((1* 60))  # Wait 1 minute after restart
+last_restart_time=0
+increment_updated=""
+
+# ANSI color codes
+GREEN='\033[0;32m'
+YELLOW='\033[1;33m'
+CYAN='\033[0;36m'
+RED='\033[0;31m'
+NC='\033[0m' # No Color
+
+# Service restart function
+restart_service() {
+    local reason=$1
+    echo -e "${RED}REASON FOR RESTART: $reason${NC}"
+    echo "Restarting service..."
+    sudo systemctl restart ceremonyclient.service
+    last_restart_time=$(date +%s)
+    last_change_time=$last_restart_time
+    last_decrease_time=$last_restart_time
+    
+    echo -e "${YELLOW}Service restarted. Waiting 5 minutes for logs to stabilize...${NC}"
+    for i in {300..1}; do
+        echo -ne "Remaining time: $i seconds\r"
+        sleep 1
+    done
+    echo -e "\nWait time complete. Starting log analysis..."
+    sleep 2
+}
+
+# Continuously running while loop
+while true; do
+    clear_screen
+    current_time=$(date +%s)
+    increment_updated=""
+    
+    time_since_restart=$((current_time - last_restart_time))
+    if [ $last_restart_time -ne 0 ] && [ $time_since_restart -lt $RESTART_WAIT_TIME ]; then
+        remaining_wait=$((RESTART_WAIT_TIME - time_since_restart))
+        echo -e "${YELLOW}It's been $time_since_restart seconds since the last restart."
+        echo -e "Waiting $remaining_wait seconds before a new restart can be triggered...${NC}"
+    else
+        last_decrease=$(sudo journalctl -u ceremonyclient.service -o short-iso -n 2000 | grep 'publishing' | tail -n 20 | \
+        awk -v current_time="$current_time" '
+        BEGIN {
+            total_time=0;
+            total_decrement=0;
+            count=0;
+            last_decrease_gap=0;
+        }
+        {
+            timestamp=$1;
+            increment=gensub(/.*"increment":([0-9]+).*/, "\\1", "g", $0);
+            cmd="date -d \"" timestamp "\" +%s";
+            cmd | getline entry_time;
+            close(cmd);
+            
+            if (previous_time && previous_increment) {
+                time_gap=entry_time-previous_time;
+                decrement=previous_increment-increment;
+                if (decrement > 0) {
+                    total_time+=time_gap;
+                    total_decrement+=decrement;
+                    count++;
+                }
+            };
+            previous_time=entry_time;
+            previous_increment=increment;
+        }
+        END {
+            last_decrease_gap=(current_time - previous_time);
+            printf "%d", last_decrease_gap;
+        }')
+
+        current_increment=$(sudo journalctl -u ceremonyclient.service -o short-iso -n 1 | grep 'publishing' | awk -F'"increment":' '{print $2}' | awk -F',' '{print $1}')
+        
+        if [ $time_since_restart -ge $RESTART_WAIT_TIME ] || [ $last_restart_time -eq 0 ]; then
+            if [ ! -z "$last_decrease" ] && [ "$last_decrease" -gt "$RESTART_THRESHOLD" ]; then
+                restart_service "Last decrease was $last_decrease seconds ago (more than 5 minutes)"
+                continue
+            fi
+            
+            if [ ! -z "$current_increment" ]; then
+                if [ "$current_increment" != "$last_increment" ]; then
+                    last_increment=$current_increment
+                    last_change_time=$current_time
+                    increment_updated="${YELLOW}Increment value updated: $current_increment${NC}"
+                else
+                    time_since_last_change=$((current_time - last_change_time))
+                    
+                    if [ $time_since_last_change -ge $RESTART_THRESHOLD ]; then
+                        restart_service "Increment value has not changed for $time_since_last_change seconds"
+                        continue
+                    fi
+                fi
+            fi
+        fi
+
+        # Log analysis output
+        sudo journalctl -u ceremonyclient.service -o short-iso -n 2000 | grep 'publishing' | tail -n 20 | \
+        awk -v current_time="$current_time" '
+        BEGIN {
+            total_time=0;
+            total_decrement=0;
+            count=0
+        }
+        {
+            timestamp=$1;
+            increment=gensub(/.*"increment":([0-9]+).*/, "\\1", "g", $0);
+            cmd="date -d \"" timestamp "\" +%s";
+            cmd | getline entry_time;
+            close(cmd);
+            
+            if (previous_time && previous_increment) {
+                time_gap=entry_time-previous_time;
+                decrement=previous_increment-increment;
+                if (decrement > 0) {
+                    total_time+=time_gap;
+                    total_decrement+=decrement;
+                    count++;
+                    printf "Increment %s, Time Gap: %ss, Decrement: %s\n", increment, time_gap, decrement
+                }
+            };
+            previous_time=entry_time;
+            previous_increment=increment
+        }
+        END {
+            last_decrement_gap=(current_time - previous_time);
+            avg_time_per_decrement=(count > 0 && total_decrement > 0) ? total_time / total_decrement : 0;
+            
+            printf "___________________________________________________________\n";
+            printf "Last Decrease: %s Seconds ago\n", last_decrement_gap;
+        }'
+        
+        
+        # Ongoing statistics
+        sudo journalctl -u ceremonyclient.service -o short-iso -n 2000 | grep 'publishing' | tail -n 20 | \
+        awk -v current_time="$current_time" '
+        BEGIN {
+            total_time=0;
+            total_decrement=0;
+            count=0
+        }
+        {
+            timestamp=$1;
+            increment=gensub(/.*"increment":([0-9]+).*/, "\\1", "g", $0);
+            cmd="date -d \"" timestamp "\" +%s";
+            cmd | getline entry_time;
+            close(cmd);
+            
+            if (previous_time && previous_increment) {
+                time_gap=entry_time-previous_time;
+                decrement=previous_increment-increment;
+                if (decrement > 0) {
+                    total_time+=time_gap;
+                    total_decrement+=decrement;
+                    count++;
+                }
+            };
+            previous_time=entry_time;
+            previous_increment=increment
+        }
+        END {
+            avg_time_per_decrement=(count > 0 && total_decrement > 0) ? total_time / total_decrement : 0;
+            
+            printf "Avg Publish Time per Unit Decrement: %.6f seconds\n", avg_time_per_decrement;
+            printf "Time to reach 0 for your %s remaining Increments: %.2f days\n", previous_increment, (previous_increment * avg_time_per_decrement) / 86400;
+            printf "___________________________________________________________\n";
+            printf "Estimated time to reach 0 from different starting points:\n";
+            printf "From 3,000,000: %.2f days\n", (3000000 * avg_time_per_decrement) / 86400;
+            printf "From 2,500,000: %.2f days\n", (2500000 * avg_time_per_decrement) / 86400;
+            printf "From 2,000,000: %.2f days\n", (2000000 * avg_time_per_decrement) / 86400;
+            printf "From 1,500,000: %.2f days\n", (1500000 * avg_time_per_decrement) / 86400;
+            printf "From 1,000,000: %.2f days\n", (1000000 * avg_time_per_decrement) / 86400;
+            printf "From 500,000: %.2f days\n", (500000 * avg_time_per_decrement) / 86400;
+            printf "From 250,000: %.2f days\n", (250000 * avg_time_per_decrement) / 86400;
+        }'
+    fi
+    
+    sleep $CHECK_INTERVAL
+done

install/Install_prerequisites.sh

@@ -1,31 +1,73 @@
 #!/bin/bash
 
 # Set the version number
-
-VERSION="1.4.21.1"
-
+VERSION="2.0.4.1"
 
 # Determine the ExecStart line based on the architecture
 ARCH=$(uname -m)
 OS=$(uname -s)
 
+# Determine the node binary name based on the architecture and OS
+# Check if NODE_VERSION is empty
+if [ -z "$NODE_VERSION" ]; then
+    NODE_VERSION=$(curl -s https://releases.quilibrium.com/release | grep -E "^node-[0-9]+(\.[0-9]+)*" | grep -v "dgst" | sed 's/^node-//' | cut -d '-' -f 1 | head -n 1)
+    if [ -z "$NODE_VERSION" ]; then
+        echo "❌ Error: Unable to determine NODE_VERSION automatically."
+        echo "The script cannot proceed without a correct node version number." 
+        echo "Please try the manual step by step installation instead:"
+        echo "https://docs.quilibrium.one/start/tutorials/node-step-by-step-installation"
+        echo
+        exit 1
+    else
+        echo "✅ Automatically determined NODE_VERSION: $NODE_VERSION"
+    fi
+else
+    echo "✅ Using specified NODE_VERSION: $NODE_VERSION"
+fi
+
+# Determine qclient latest version
+# Check if QCLIENT_VERSION is empty
+if [ -z "$QCLIENT_VERSION" ]; then
+    QCLIENT_VERSION=$(curl -s https://releases.quilibrium.com/qclient-release | grep -E "^qclient-[0-9]+(\.[0-9]+)*" | sed 's/^qclient-//' | cut -d '-' -f 1 |  head -n 1)
+    if [ -z "$QCLIENT_VERSION" ]; then
+        echo "⚠️ Warning: Unable to determine QCLIENT_VERSION automatically. Continuing without it."
+        echo "The script won't be able to install the qclient, but it will still install your node."
+        echo "You can install the qclient later manually if you need to."
+        echo
+        sleep 1
+    else
+        echo "✅ Automatically determined QCLIENT_VERSION: $QCLIENT_VERSION"
+    fi
+else
+    echo "✅ Using specified QCLIENT_VERSION: $QCLIENT_VERSION"
+fi
+
+echo
+
 # Determine the node binary name based on the architecture and OS
 if [ "$ARCH" = "x86_64" ]; then
     if [ "$OS" = "Linux" ]; then
-        NODE_BINARY="node-$VERSION-linux-amd64"
+        NODE_BINARY="node-$NODE_VERSION-linux-amd64"
         GO_BINARY="go1.22.4.linux-amd64.tar.gz"
+        [ -n "$QCLIENT_VERSION" ] && QCLIENT_BINARY="qclient-$QCLIENT_VERSION-linux-amd64"
     elif [ "$OS" = "Darwin" ]; then
-        NODE_BINARY="node-$VERSION-darwin-amd64"
-        GO_BINARY="go1.22.44.linux-amd64.tar.gz"
+        NODE_BINARY="node-$NODE_VERSION-darwin-amd64"
+        GO_BINARY="go1.22.4.darwin-amd64.tar.gz"
+        [ -n "$QCLIENT_VERSION" ] && QCLIENT_BINARY="qclient-$QCLIENT_VERSION-darwin-amd64"
     fi
 elif [ "$ARCH" = "aarch64" ]; then
     if [ "$OS" = "Linux" ]; then
-        NODE_BINARY="node-$VERSION-linux-arm64"
+        NODE_BINARY="node-$NODE_VERSION-linux-arm64"
         GO_BINARY="go1.22.4.linux-arm64.tar.gz"
+        [ -n "$QCLIENT_VERSION" ] && QCLIENT_BINARY="qclient-$QCLIENT_VERSION-linux-arm64"
     elif [ "$OS" = "Darwin" ]; then
-        NODE_BINARY="node-$VERSION-darwin-arm64"
-        GO_BINARY="go1.22.4.linux-arm64.tar.gz"
+        NODE_BINARY="node-$NODE_VERSION-darwin-arm64"
+        GO_BINARY="go1.22.4.darwin-arm64.tar.gz"
+        [ -n "$QCLIENT_VERSION" ] && QCLIENT_BINARY="qclient-$QCLIENT_VERSION-darwin-arm64"
     fi
+else
+    echo "❌ Error: Unsupported system architecture ($ARCH) or operating system ($OS)."
+    exit 1
 fi
 
 echo "Installing prerequisites..."

install/install.sh

@@ -3,7 +3,7 @@
 cd ~
 
 # Step 0: Welcome
-echo "This script is made with ❤️ by 0xOzgur.eth @ https://quilibrium.space "
+echo "This script is made with ❤️ by 0xOzgur @ https://quilibrium.space "
 echo "The script is prepared for Ubuntu machines. If you are using another operating system, please check the compatibility of the script."
 echo "The script doesn't install GO or GrpCurl packages. If you want to install them please visit https://docs.quilibrium.space/installing-prerequisites page."
 echo "⏳Enjoy and sit back while you are building your Quilibrium Node!"
@@ -121,7 +121,7 @@ git checkout release-cdn
 # Build Ceremonyclient qClient
 echo "⏳Building qCiient"
 sleep 1  # Add a 1-second delay
-cd ~/ceremonyclient/client
+cd ~/ceremonyclient/node
 GOEXPERIMENT=arenas go build -o qclient main.go
 
 # Step 5:Determine the ExecStart line based on the architecture
@@ -129,7 +129,7 @@ GOEXPERIMENT=arenas go build -o qclient main.go
 HOME=$(eval echo ~$HOME_DIR)
 # Use the home directory in the path
 NODE_PATH="$HOME/ceremonyclient/node"
-EXEC_START="$NODE_PATH/release_autorun.sh"
+EXEC_START="$NODE_PATH/$NODE_BINARY"
 
 # Create Ceremonyclient Service
 echo "⏳Creating Ceremonyclient Service"
@@ -156,7 +156,7 @@ RestartSec=5s
 WorkingDirectory=$NODE_PATH
 ExecStart=$EXEC_START
 KillSignal=SIGINT
-TimeoutStopSec=30s
+TimeoutStopSec=75s
 
 [Install]
 WantedBy=multi-user.target

install/install_docker.sh

@@ -3,7 +3,7 @@
 cd ~
 
 # Step 0: Welcome
-echo "This script is made with ❤️ by 0xOzgur.eth @ https://quilibrium.space"
+echo "This script is made with ❤️ by 0xOzgur @ https://quilibrium.space"
 echo "⏳Enjoy and sit back while you are building your Quilibrium Ceremony Client!"
 echo "⏳Processing..."
 sleep 10  # Add a 10-second delay
@@ -61,7 +61,8 @@ git checkout release-cdn
 echo "⏳Building Ceremonyclient Container"
 sleep 2  # Add a 2-second delay
 
-docker build --build-arg GIT_COMMIT=$(git log -1 --format=%h) -t quilibrium:1.4.21.1 .1.4.21.1
+docker build --build-arg GIT_COMMIT=$(git log -1 --format=%h) -t quilibrium:2.0 .2.0
+
 
 
 # Step 8:Run Ceremonyclient Container

install/install_quilibrium_service.sh

@@ -1,11 +1,12 @@
 #!/bin/bash
 # Set the version number
 
-VERSION="1.4.21.1"
+VERSION="2.0.4.1"
+qClientVERSION="2.0.4.1"
 
 cd ~
 # Step 0: Welcome
-echo "This script is made with ❤️ by 0xOzgur.eth @ https://quilibrium.space "
+echo "This script is made with ❤️ by 0xOzgur @ https://quilibrium.space "
 echo "The script is prepared for Ubuntu machines. If you are using another operating system, please check the compatibility of the script."
 echo "The script doesn't install GO or GrpCurl packages. If you want to install them please visit https://docs.quilibrium.space/installing-prerequisites page."
 echo "⏳Enjoy and sit back while you are building your Quilibrium Node!"
@@ -36,15 +37,6 @@ else
     echo "git is installed"
 fi
 
-# if ! command -v cpulimit &> /dev/null
-# then
-#     echo "cpulimit could not be found"
-#     echo "Installing cpulimit..."
-#     su -c "apt update && apt install cpulimit -y"
-# else
-#     echo "cpulimit is installed"
-# fi
-
 sudo apt upgrade -y
 
 # Step 2: Adjust network buffer sizes
@@ -96,6 +88,70 @@ cd ~/ceremonyclient/
 # git remote set-url origin https://github.com/QuilibriumNetwork/ceremonyclient.git || git remote set-url origin https://source.quilibrium.com/quilibrium/ceremonyclient.git 
 git checkout release
 
+#==========================
+# NODE BINARY DOWNLOAD
+#==========================
+
+get_os_arch() {
+    local os=$(uname -s | tr '[:upper:]' '[:lower:]')
+    local arch=$(uname -m)
+
+    case "$os" in
+        linux|darwin) ;;
+        *) echo "Unsupported operating system: $os" >&2; return 1 ;;
+    esac
+
+    case "$arch" in
+        x86_64|amd64) arch="amd64" ;;
+        arm64|aarch64) arch="arm64" ;;
+        *) echo "Unsupported architecture: $arch" >&2; return 1 ;;
+    esac
+
+    echo "${os}-${arch}"
+}
+
+# Get the current OS and architecture
+OS_ARCH=$(get_os_arch)
+
+# Base URL for the Quilibrium releases
+RELEASE_FILES_URL="https://releases.quilibrium.com/release"
+
+# Fetch the list of files from the release page
+# Updated regex to allow for an optional fourth version number
+RELEASE_FILES=$(curl -s $RELEASE_FILES_URL | grep -oE "node-[0-9]+\.[0-9]+\.[0-9]+(\.[0-9]+)?-${OS_ARCH}(\.dgst)?(\.sig\.[0-9]+)?")
+
+# Change to the download directory
+cd ~/ceremonyclient/node
+
+# Download each file
+for file in $RELEASE_FILES; do
+    echo "Downloading $file..."
+    curl -L -o "$file" "https://releases.quilibrium.com/$file"
+    
+    # Check if the download was successful
+    if [ $? -eq 0 ]; then
+        echo "Successfully downloaded $file"
+        # Check if the file is the base binary (without .dgst or .sig suffix)
+        if [[ $file =~ ^node-[0-9]+\.[0-9]+\.[0-9]+(\.[0-9]+)?-${OS_ARCH}$ ]]; then
+            echo "Making $file executable..."
+            chmod +x "$file"
+            if [ $? -eq 0 ]; then
+                echo "Successfully made $file executable"
+            else
+                echo "Failed to make $file executable"
+            fi
+        fi
+    else
+        echo "Failed to download $file"
+    fi
+    
+    echo "------------------------"
+done
+
+echo "✅  Node binary download completed."
+
+
+
 # Determine the ExecStart line based on the architecture
 ARCH=$(uname -m)
 OS=$(uname -s)
@@ -105,11 +161,11 @@ if [ "$ARCH" = "x86_64" ]; then
     if [ "$OS" = "Linux" ]; then
         NODE_BINARY="node-$VERSION-linux-amd64"
         GO_BINARY="go1.22.4.linux-amd64.tar.gz"
-        QCLIENT_BINARY="qclient-1.4.19.1-linux-amd64"
+        QCLIENT_BINARY="qclient-$qClientVERSION-linux-amd64"
     elif [ "$OS" = "Darwin" ]; then
         NODE_BINARY="node-$VERSION-darwin-amd64"
         GO_BINARY="go1.22.44.linux-amd64.tar.gz"
-        QCLIENT_BINARY="qclient-1.4.19.1-darwin-arm64"
+        QCLIENT_BINARY="qclient-$qClientVERSION-darwin-arm64"
     fi
 elif [ "$ARCH" = "aarch64" ]; then
     if [ "$OS" = "Linux" ]; then
@@ -118,17 +174,66 @@ elif [ "$ARCH" = "aarch64" ]; then
     elif [ "$OS" = "Darwin" ]; then
         NODE_BINARY="node-$VERSION-darwin-arm64"
         GO_BINARY="go1.22.4.linux-arm64.tar.gz"
-        QCLIENT_BINARY="qclient-1.4.19.1-linux-arm64"
+        QCLIENT_BINARY="qclient-$qClientVERSION-linux-arm64"
     fi
 fi
 
+
+get_os_arch() {
+    local os=$(uname -s | tr '[:upper:]' '[:lower:]')
+    local arch=$(uname -m)
+
+    case "$os" in
+        linux|darwin) ;;
+        *) echo "Unsupported operating system: $os" >&2; return 1 ;;
+    esac
+
+    case "$arch" in
+        x86_64|amd64) arch="amd64" ;;
+        arm64|aarch64) arch="arm64" ;;
+        *) echo "Unsupported architecture: $arch" >&2; return 1 ;;
+    esac
+
+    echo "${os}-${arch}"
+}
+
+
 # Step 4:Download qClient
 echo "⏳Downloading qClient"
 sleep 1  # Add a 1-second delay
-cd ~/ceremonyclient/client
-wget https://releases.quilibrium.com/$QCLIENT_BINARY
-mv $QCLIENT_BINARY qclient
-chmod +x qclient
+# Get the current OS and architecture
+OS_ARCH=$(get_os_arch)
+
+# Base URL for the Quilibrium releases
+BASE_URL="https://releases.quilibrium.com/qclient-release"
+
+# Fetch the list of files from the release page
+FILES=$(curl -s $BASE_URL | grep -oE "qclient-[0-9]+\.[0-9]+\.[0-9]+(\.[0-9]+)?-${OS_ARCH}(\.dgst)?(\.sig\.[0-9]+)?")
+
+# Change to the download directory
+cd ~/ceremonyclient/node
+
+# Download each file
+for file in $FILES; do
+    echo "Downloading $file..."
+    wget "https://releases.quilibrium.com/$file"
+    
+    # Check if the download was successful
+    if [ $? -eq 0 ]; then
+        echo "Successfully downloaded $file"
+    else
+        echo "❌ Error: Failed to download $file"
+        echo "Your node will still work, but you'll need to install the qclient manually later if needed."
+    fi
+    
+    echo "------------------------"
+done
+
+        //
+        chmod +x qclient*
+        echo "✅ qClient binary downloaded and configured successfully."
+
+echo
 
 # Step 5:Determine the ExecStart line based on the architecture
 # Get the current user's home directory
@@ -136,7 +241,7 @@ HOME=$(eval echo ~$HOME_DIR)
 
 # Use the home directory in the path
 NODE_PATH="$HOME/ceremonyclient/node"
-EXEC_START="$NODE_PATH/release_autorun.sh"
+EXEC_START="$NODE_PATH/$NODE_BINARY"
 
 # Step 6:Create Ceremonyclient Service
 echo "⏳ Creating Ceremonyclient Service"
@@ -163,7 +268,7 @@ RestartSec=5s
 WorkingDirectory=$NODE_PATH
 ExecStart=$EXEC_START
 KillSignal=SIGINT
-TimeoutStopSec=30s
+TimeoutStopSec=75s
 
 [Install]
 WantedBy=multi-user.target

install/testnet.sh

@@ -0,0 +1,173 @@
+#!/bin/bash
+# Set the version number
+
+VERSION="2.0.4.1-b7-testnet"
+qClientVERSION="2.0.4.1"
+
+cd ~
+# Step 0: Welcome
+echo "This script is made with ❤️ by 0xOzgur @ https://quilibrium.space "
+echo "The script is prepared for Ubuntu machines. If you are using another operating system, please check the compatibility of the script."
+echo "This script will be building new fresh Node for Quilibrium Testnet. Your use is at your own risk. 0xOzgur does not accept any liability."
+echo "⏳Enjoy and sit back while you are building your Quilibrium Testnet Node!"
+echo "⏳Processing..."
+sleep 5  # Add a 10-second delay
+
+# Step 1: Update and Upgrade the Machine
+echo "Updating the machine"
+echo "⏳Processing..."
+sleep 2  # Add a 2-second delay
+
+# Fof DEBIAN OS - Check if sudo and git is installed
+if ! command -v sudo &> /dev/null
+then
+    echo "sudo could not be found"
+    echo "Installing sudo..."
+    su -c "apt update && apt install sudo -y"
+else
+    echo "sudo is installed"
+fi
+
+if ! command -v git &> /dev/null
+then
+    echo "git could not be found"
+    echo "Installing git..."
+    su -c "apt update && apt install git -y"
+else
+    echo "git is installed"
+fi
+
+sudo apt upgrade -y
+
+# Step 2: Adjust network buffer sizes
+echo "Adjusting network buffer sizes..."
+if grep -q "^net.core.rmem_max=600000000$" /etc/sysctl.conf; then
+  echo "net.core.rmem_max=600000000 found inside /etc/sysctl.conf, skipping..."
+else
+  echo -e "\n# Change made to increase buffer sizes for better network performance for ceremonyclient\nnet.core.rmem_max=600000000" | sudo tee -a /etc/sysctl.conf > /dev/null
+fi
+if grep -q "^net.core.wmem_max=600000000$" /etc/sysctl.conf; then
+  echo "net.core.wmem_max=600000000 found inside /etc/sysctl.conf, skipping..."
+else
+  echo -e "\n# Change made to increase buffer sizes for better network performance for ceremonyclient\nnet.core.wmem_max=600000000" | sudo tee -a /etc/sysctl.conf > /dev/null
+fi
+sudo sysctl -p
+
+# Step 4:Download Ceremonyclient
+echo "⏳Creating Testnet Directories"
+sleep 1  # Add a 1-second delay
+mkdir testnet
+cd ~/testnet
+mkdir ceremonyclient
+cd ~/testnet/ceremonyclient/
+
+# Determine the ExecStart line based on the architecture
+ARCH=$(uname -m)
+OS=$(uname -s)
+
+# Determine the node binary name based on the architecture and OS
+if [ "$ARCH" = "x86_64" ]; then
+    if [ "$OS" = "Linux" ]; then
+        NODE_BINARY="node-$VERSION-linux-amd64"
+        GO_BINARY="go1.22.4.linux-amd64.tar.gz"
+        QCLIENT_BINARY="qclient-$qClientVERSION-linux-amd64"
+    elif [ "$OS" = "Darwin" ]; then
+        NODE_BINARY="node-$VERSION-darwin-amd64"
+        GO_BINARY="go1.22.44.linux-amd64.tar.gz"
+        QCLIENT_BINARY="qclient-$qClientVERSION-darwin-arm64"
+    fi
+elif [ "$ARCH" = "aarch64" ]; then
+    if [ "$OS" = "Linux" ]; then
+        NODE_BINARY="node-$VERSION-linux-arm64"
+        GO_BINARY="go1.22.4.linux-arm64.tar.gz"
+    elif [ "$OS" = "Darwin" ]; then
+        NODE_BINARY="node-$VERSION-darwin-arm64"
+        GO_BINARY="go1.22.4.linux-arm64.tar.gz"
+        QCLIENT_BINARY="qclient-$qClientVERSION-linux-arm64"
+    fi
+fi
+
+
+#==========================
+# NODE BINARY DOWNLOAD
+#==========================
+
+# Step 4:Download qClient
+echo "⏳Downloading qClient"
+sleep 1  # Add a 1-second delay
+    cd ~/testnet/ceremonyclient/node
+    wget https://releases.quilibrium.com/$NODE_BINARY
+    chmod +x $NODE_BINARY
+echo "✅  Node binary for testnet downloaded and permissions configured completed."
+
+#==========================
+# qCLIENT BINARY DOWNLOAD
+#==========================
+    cd ~/testnet/ceremonyclient/client
+    wget https://releases.quilibrium.com/$QCLIENT_BINARY
+    chmod +x $QCLIENT_BINARY
+    echo "✅  qClient binary for testnet downloaded and permissions configured completed."
+echo
+
+# Step 5:Determine the ExecStart line based on the architecture
+# Get the current user's home directory
+HOME=$(eval echo ~$HOME_DIR)
+
+# Use the home directory in the path
+NODE_PATH="$HOME/testnet/ceremonyclient/node"
+EXEC_START="$NODE_PATH/$NODE_BINARY"
+
+# Step 6:Create Ceremonyclient Service
+echo "⏳ Stopping Ceremonyclient Service"
+service ceremonyclient stop
+sleep 2  # Add a 2-second delay
+
+echo "⏳ Creating Ceremonyclient Testnet Service"
+sleep 2  # Add a 2-second delay
+
+sudo tee /lib/systemd/system/qtestnet.service > /dev/null <<EOF
+[Unit]
+Description=Ceremony Client Testnet Service
+
+[Service]
+Type=simple
+Restart=always
+RestartSec=5s
+WorkingDirectory=$NODE_PATH
+ExecStart=$EXEC_START --signature-check=false --network=1
+KillSignal=SIGINT
+TimeoutStopSec=75s
+
+[Install]
+WantedBy=multi-user.target
+EOF
+
+sudo systemctl daemon-reload
+# sudo systemctl enable ceremonyclient
+
+# Step 7: Start the ceremonyclient service
+echo "✅Starting Ceremonyclient Testnet Service"
+sleep 1  # Add a 1-second delay
+sudo service qtestnet start
+
+# Step 8: See the logs of the ceremonyclient service
+echo "🎉Welcome to Quilibrium Ceremonyclient VERSION"
+echo "⏳Please let it flow node logs at least 5 minutes then you can press CTRL + C to exit the logs."
+sleep 30  # Add a 5-second delay
+
+CONFIG_FILE="$HOME/testnet/ceremonyclient/node/.config/config.yml"
+
+# Backup the original file
+cp "$CONFIG_FILE" "${CONFIG_FILE}.bak"
+
+# Comment out existing bootstrap peers
+sed -i '/bootstrapPeers:/,/^[^ ]/s/^  -/#  -/' "$CONFIG_FILE"
+
+# Add the new bootstrap peer
+sed -i '/bootstrapPeers:/a\  - /ip4/91.242.214.79/udp/8336/quic-v1/p2p/QmNSGavG2DfJwGpHmzKjVmTD6CVSyJsUFTXsW4JXt2eySR' "$CONFIG_FILE"
+
+echo "Bootstrap peers updated in $CONFIG_FILE"
+echo "Original file backed up as ${CONFIG_FILE}.bak"
+
+sudo service qtestnet restart
+sudo journalctl -u qtestnet.service -f --no-hostname -o cat

node-monitor.sh

@@ -0,0 +1,98 @@
+#!/bin/bash
+
+# Define file paths for storing previous values
+seniority_file="/tmp/previous_seniority.txt"
+balance_file="/tmp/previous_balance.txt"
+
+# Arrays to store the last 30 frame ages
+submitting_ages=()
+creating_ages=()
+
+# Flags to track the detection of both messages
+submitting_proof_detected=false
+shard_ring_proof_detected=false
+
+# Function to calculate the average of an array
+calculate_average() {
+    local arr=("$@")
+    local sum=0
+    for age in "${arr[@]}"; do
+        sum=$(echo "$sum + $age" | bc)
+    done
+    echo "scale=2; $sum / ${#arr[@]}" | bc
+}
+
+# Monitor journalctl for the specific keywords
+sudo journalctl -u ceremonyclient.service -f --no-hostname -o cat | grep --line-buffered -E 'submitting data proof|creating data shard ring proof' | while read -r line
+do
+    # Print a human-readable timestamp
+    echo "$(date '+%Y-%m-%d %H:%M:%S') - $line"
+
+    # Check for each specific message, extract frame age, and update arrays
+    if [[ "$line" == *"submitting data proof"* ]]; then
+        submitting_proof_detected=true
+        frame_age=$(echo "$line" | grep -oP '"frame_age":[0-9.]+(?=})' | cut -d: -f2)
+        submitting_ages+=("$frame_age")
+        # Keep only the last 30 frame ages
+        if [ ${#submitting_ages[@]} -gt 30 ]; then
+            submitting_ages=("${submitting_ages[@]:1}")
+        fi
+    elif [[ "$line" == *"creating data shard ring proof"* ]]; then
+        shard_ring_proof_detected=true
+        frame_age=$(echo "$line" | grep -oP '"frame_age":[0-9.]+(?=})' | cut -d: -f2)
+        creating_ages+=("$frame_age")
+        # Keep only the last 30 frame ages
+        if [ ${#creating_ages[@]} -gt 30 ]; then
+            creating_ages=("${creating_ages[@]:1}")
+        fi
+    fi
+
+    # Only proceed if both messages have been detected
+    if $submitting_proof_detected && $shard_ring_proof_detected; then
+        # Reset flags for the next cycle
+        submitting_proof_detected=false
+        shard_ring_proof_detected=false
+
+        # Print the averages for the last 30 frame ages
+        echo "Average frame age for 'creating data shard ring proof': $(calculate_average "${creating_ages[@]}")"
+        echo "Average frame age for 'submitting data proof': $(calculate_average "${submitting_ages[@]}")"
+
+        # Navigate to the ceremonyclient/node directory
+        cd ~/ceremonyclient/node
+
+        # Run the token balance command and filter for the Total balance line
+        total_balance=$(./qclient-2.0.4.1-linux-amd64 token balance | grep -oP 'Total balance: \K[0-9.]+')
+        echo "Total balance: $total_balance"
+
+        # Run the node-info command and filter for specific lines
+        node_info=$(./node-2.0.4.1-linux-amd64 -node-info)
+        seniority=$(echo "$node_info" | grep -oP 'Seniority: \K[0-9]+')
+        prover_ring=$(echo "$node_info" | grep 'Prover Ring')
+        owned_balance=$(echo "$node_info" | grep 'Owned balance')
+
+        echo "$prover_ring"
+        echo "Seniority: $seniority"
+        echo "$owned_balance"
+
+        # Load previous values if they exist, otherwise set defaults
+        previous_seniority=$(cat "$seniority_file" 2>/dev/null || echo "0")
+        previous_balance=$(cat "$balance_file" 2>/dev/null || echo "0")
+
+        # Compare and check if Seniority and Total balance have increased
+        if (( seniority > previous_seniority )); then
+            echo "Seniority has increased from $previous_seniority to $seniority"
+        else
+            echo "Seniority has not increased."
+        fi
+
+        if (( $(echo "$total_balance > $previous_balance" | bc -l) )); then
+            echo "Total balance has increased from $previous_balance to $total_balance"
+        else
+            echo "Total balance has not increased."
+        fi
+
+        # Store current Seniority and Total balance for the next iteration
+        echo "$seniority" > "$seniority_file"
+        echo "$total_balance" > "$balance_file"
+    fi
+done

profile/.bash_profile

@@ -28,15 +28,16 @@ OS=$(uname -s)
 # Determine the node binary name based on the architecture and OS
 if [ "$ARCH" = "x86_64" ]; then
     if [ "$OS" = "Linux" ]; then
-        NODE_BINARY='node-1.4.21.1-linux-amd64'
+
+        NODE_BINARY='node-2.0-linux-amd64'
     elif [ "$OS" = "Darwin" ]; then
-        NODE_BINARY='node-1.4.21.1-darwin-amd64'
+        NODE_BINARY='node-2.0-darwin-amd64'
     fi
 elif [ "$ARCH" = "aarch64" ]; then
     if [ "$OS" = "Linux" ]; then
-        NODE_BINARY='node-1.4.21.1-linux-arm64'
+        NODE_BINARY='node-2.0-linux-arm64'
     elif [ "$OS" = "Darwin" ]; then
-        NODE_BINARY='node-1.4.21.1-darwin-arm64'
+        NODE_BINARY='node-2.0-darwin-arm64'
     fi
 fi
 

profile/.profile

@@ -17,23 +17,22 @@ alias wttr='curl wttr.in'
 
 neofetch
 
-# Shortcuts for Docker
-alias dpeer-count='cd ~/ceremonyclient/ && docker compose exec node grpcurl -plaintext -max-msg-sz 150000000 localhost:8337 quilibrium.node.node.pb.NodeService.GetPeerManifests | grep peerId | wc -l'
-alias dnode-info='cd ~/ceremonyclient/ && docker compose exec node node -node-info && cd ~'
-alias ddb-console='cd ~/ceremonyclient/ && - docker compose exec node node --db-console && cd ~'
-alias dbalance='cd ~/ceremonyclient/ && docker compose exec node node -balance && cd ~'
-alias dlog='cd ~/ceremonyclient/ && docker compose logs -f -n, --tail 100 && cd ~'
-alias dstart='cd ~/ceremonyclient/ && docker compose up -d && cd ~'
-alias drestart='cd ~/ceremonyclient/ && docker compose down && docker compose up -d && cd ~'
-alias dstop='cd ~/ceremonyclient/ && docker compose down && cd ~'
 # Shortcuts for Service
 alias peer-count="cd ~/ceremonyclient/node && grpcurl -plaintext -max-msg-sz 150000000 localhost:8337 quilibrium.node.node.pb.NodeService.GetPeerManifests | grep peerId | wc -l && cd ~"
-alias node-info="cd ~/ceremonyclient/node && ./node-1.4.21-linux-amd64 -node-info && cd ~"
-alias db-console="cd ~/ceremonyclient/node && ./node-1.4.21-linux-amd64 --db-console && cd ~"
-alias balance="cd ~/ceremonyclient/node && ./node-1.4.21-linux-amd64 -balance && cd ~"
+alias node-info="cd ~/ceremonyclient/node && ./node-2.0.4.1-linux-amd64 -node-info && cd ~"
+alias db-console="cd ~/ceremonyclient/node && ./node-2.0.4.1-linux-amd64 --db-console && cd ~"
+alias balance="cd ~/ceremonyclient/node && ./node-2.0.4.1-linux-amd64 -balance && cd ~"
 alias nlog="sudo journalctl -u ceremonyclient.service -f --no-hostname -o cat"
 alias increment="sudo journalctl -u ceremonyclient.service -f --no-hostname -o cat | grep time_taken"
+alias frame="sudo journalctl -u ceremonyclient.service -f --no-hostname -o cat | grep frame_number"
 alias nstart="service ceremonyclient start"
 alias nrestart="service ceremonyclient restart"
 alias nstop="service ceremonyclient stop"
-alias benchmark='increment=$(journalctl -u ceremonyclient -ocat -n 100 | grep increment | awk -F'\[:,\}\]' '\''{for(i=1;i<=NF;i++){if($i~"increment"){gsub(/[ "]/,"",$i); print $(i+1)}}}'\'' | tail -n 1) && difficulty=$(expr 200000 - $increment / 4) && cpus=$(nproc) && score=$(echo "scale=2; ($cpus*$cpus*1000)/$difficulty" | bc) && echo "" && echo "CPU(s): $cpus" && echo "Increment: $increment" && echo "Difficulty: $difficulty" && echo "Score: $score"'
+alias benchmark='increment=$(journalctl -u ceremonyclient -ocat -n 100 | grep increment | awk -F'\[:,\}\]' '\''{for(i=1;i<=NF;i++){if($i~"increment"){gsub(/[ "]/,"",$i); print $(i+1)}}}'\'' | tail -n 1) && difficulty=$(expr 200000 - $increment / 4) && cpus=$(nproc) && score=$(echo "scale=2; ($cpus*$cpus*1000)/$difficulty" | bc) && echo "" && echo "CPU(s): $cpus" && echo "Increment: $increment" && echo "Difficulty: $difficulty" && echo "Score: $score"'
+alias qbalance="cd ~/ceremonyclient/node && ./qclient-2.0.4.1-linux-amd64 token balance --public-rpc"
+alias qtoken="cd ~/ceremonyclient/node && ./qclient-2.0.4.1-linux-amd64 token coins --public-rpc"
+alias qmint="cd ~/ceremonyclient/node && ./qclient-2.0.4.1-linux-amd64 token mint all --public-rpc"
+alias qmerge="cd ~/ceremonyclient/node && ./qclient-2.0.4.1-linux-amd64 token merge all --public-rpc"
+alias mincrement="journalctl -u ceremonyclient.service -f --no-hostname -o cat -g 'publishing proof batch'-n 1000"
+alias qnode="cd ~/ceremonyclient/node"
+alias client="cd ~/ceremonyclient/node"

quilibrium_for_dummies.sh

@@ -7,7 +7,8 @@ clear
 
 # Set the version number
 
-VERSION="1.4.21.1"
+VERSION="2.0.4.1"
+qClientVERSION="2.0.4.1"
 
 
 # Determine the ExecStart line based on the architecture
@@ -19,11 +20,11 @@ if [ "$ARCH" = "x86_64" ]; then
     if [ "$OS" = "Linux" ]; then
         NODE_BINARY="node-$VERSION-linux-amd64"
         GO_BINARY="go1.22.4.linux-amd64.tar.gz"
-        QCLIENT_BINARY="qclient-$VERSION-linux-amd64"
+        QCLIENT_BINARY="qclient-$qClientVERSION-linux-amd64"
     elif [ "$OS" = "Darwin" ]; then
         NODE_BINARY="node-$VERSION-darwin-amd64"
         GO_BINARY="go1.22.44.linux-amd64.tar.gz"
-        QCLIENT_BINARY="qclient-$VERSION-darwin-arm64"
+        QCLIENT_BINARY="qclient-$qClientVERSION-darwin-arm64"
     fi
 elif [ "$ARCH" = "aarch64" ]; then
     if [ "$OS" = "Linux" ]; then
@@ -32,17 +33,17 @@ elif [ "$ARCH" = "aarch64" ]; then
     elif [ "$OS" = "Darwin" ]; then
         NODE_BINARY="node-$VERSION-darwin-arm64"
         GO_BINARY="go1.22.4.linux-arm64.tar.gz"
-        QCLIENT_BINARY="qclient-$VERSION-linux-arm64"
+        QCLIENT_BINARY="qclient-$qClientVERSION-linux-arm64"
     fi
 fi
 
 # URLs for scripts
-UPDATE_URL="https://raw.githubusercontent.com/0xOzgur/QuilibriumTools/main/update.sh"
-PREREQUISITES_URL="https://raw.githubusercontent.com/0xOzgur/QuilibriumTools/main/install/Install_prerequisites.sh"
-NODE_INSTALL_URL="https://raw.githubusercontent.com/0xOzgur/QuilibriumTools/main/install/install_quilibrium_service.sh"
-GRPCURL_CONFIG_URL="https://raw.githubusercontent.com/0xOzgur/QuilibriumTools/main/configuration/config.sh"
-NODE_UPDATE_URL="https://raw.githubusercontent.com/0xOzgur/QuilibriumTools/main/update/update.sh"
-CHECK_VISIBILITY_URL="https://raw.githubusercontent.com/0xOzgur/QuilibriumTools/main/visibility_check.sh"
+UPDATE_URL="https://git.088.im/coosld/QuilibriumTools/raw/branch/main/update.sh"
+PREREQUISITES_URL="https://git.088.im/coosld/QuilibriumTools/raw/branch/main/install/Install_prerequisites.sh"
+NODE_INSTALL_URL="https://git.088.im/coosld/QuilibriumTools/raw/branch/main/install/install_quilibrium_service.sh"
+GRPCURL_CONFIG_URL="https://git.088.im/coosld/QuilibriumTools/raw/branch/main/configuration/config.sh"
+NODE_UPDATE_URL="https://git.088.im/coosld/QuilibriumTools/raw/branch/main/update/update.sh"
+CHECK_VISIBILITY_URL="https://git.088.im/coosld/QuilibriumTools/raw/branch/main/visibility_check.sh"
 
 # Function for each menu option
 install_prerequisites() {
@@ -102,9 +103,8 @@ stop_node() {
 # Menu
 while true; do
     clear
-    echo "This script is made with ❤️ by 0xOzgur.eth @ https://quilibrium.space"
+    echo "This script is made with ❤️ by 0xOzgur @ https://quilibrium.space"
     echo "Welcome to Quilibrium for Dummies!"
-    
 echo "
           _____        _ _ _ _           _             
          / ___ \      (_) (_) |         (_)            
@@ -160,4 +160,4 @@ echo "
     esac
     echo ""
     read -n 1 -s -r -p "Press any key to continue"
-done
+done

update/update.sh

@@ -1,9 +1,12 @@
 #!/bin/bash
 
-VERSION="1.4.21.1"
+
+VERSION="2.0.4.1"
+qClientVERSION="2.0.4.1"
+
 
 # Step 0: Welcome
-echo "This script is made with ❤️ by 0xOzgur.eth @ https://quilibrium.space"
+echo "This script is made with ❤️ by 0xOzgur @ https://quilibrium.space"
 echo "⏳Enjoy and sit back while you are upgrading your Quilibrium Node to v$VERSION!"
 echo "The script is prepared for Ubuntu machines. If you are using another operating system, please check the compatibility of the script."
 echo "⏳Processing..."
@@ -12,6 +15,20 @@ sleep 5  # Add a 5-second delay
 # Stop the ceremonyclient service
     echo "Updating node..."
     service ceremonyclient stop
+    echo "⏳ Stopping the ceremonyclient service if it exists..."
+if systemctl is-active --quiet ceremonyclient; then
+    if sudo systemctl stop ceremonyclient; then
+        echo "🔴 Service stopped successfully."
+        echo
+    else
+        echo "❌ Failed to stop the ceremonyclient service." >&2
+        echo
+    fi
+else
+    echo "ℹ️ Ceremonyclient service is not active or does not exist."
+    echo
+fi
+sleep 1
 
 # apt install cpulimit -y
 # apt install gawk -y #incase it is not installed
@@ -24,6 +41,72 @@ git checkout main
 git branch -D release
 git pull
 git checkout release
+echo "✅ Github repo updated to the latest changes successfully."
+echo
+
+#==========================
+# NODE BINARY DOWNLOAD
+#==========================
+
+get_os_arch() {
+    local os=$(uname -s | tr '[:upper:]' '[:lower:]')
+    local arch=$(uname -m)
+
+    case "$os" in
+        linux|darwin) ;;
+        *) echo "Unsupported operating system: $os" >&2; return 1 ;;
+    esac
+
+    case "$arch" in
+        x86_64|amd64) arch="amd64" ;;
+        arm64|aarch64) arch="arm64" ;;
+        *) echo "Unsupported architecture: $arch" >&2; return 1 ;;
+    esac
+
+    echo "${os}-${arch}"
+}
+
+# Get the current OS and architecture
+OS_ARCH=$(get_os_arch)
+
+# Base URL for the Quilibrium releases
+RELEASE_FILES_URL="https://releases.quilibrium.com/release"
+
+# Fetch the list of files from the release page
+# Updated regex to allow for an optional fourth version number
+RELEASE_FILES=$(curl -s $RELEASE_FILES_URL | grep -oE "node-[0-9]+\.[0-9]+\.[0-9]+(\.[0-9]+)?-${OS_ARCH}(\.dgst)?(\.sig\.[0-9]+)?")
+
+# Change to the download directory
+cd ~/ceremonyclient/node
+
+# Download each file
+for file in $RELEASE_FILES; do
+    echo "Downloading $file..."
+    curl -L -o "$file" "https://releases.quilibrium.com/$file"
+    
+    # Check if the download was successful
+    if [ $? -eq 0 ]; then
+        echo "Successfully downloaded $file"
+        # Check if the file is the base binary (without .dgst or .sig suffix)
+        if [[ $file =~ ^node-[0-9]+\.[0-9]+\.[0-9]+(\.[0-9]+)?-${OS_ARCH}$ ]]; then
+            echo "Making $file executable..."
+            chmod +x "$file"
+            if [ $? -eq 0 ]; then
+                echo "Successfully made $file executable"
+            else
+                echo "Failed to make $file executable"
+            fi
+        fi
+    else
+        echo "Failed to download $file"
+    fi
+    
+    echo "------------------------"
+done
+
+echo "✅  Node binary download completed."
+
+
 
 # Determine the ExecStart line based on the architecture
 ARCH=$(uname -m)
@@ -34,11 +117,11 @@ if [ "$ARCH" = "x86_64" ]; then
     if [ "$OS" = "Linux" ]; then
         NODE_BINARY="node-$VERSION-linux-amd64"
         GO_BINARY="go1.22.4.linux-amd64.tar.gz"
-        QCLIENT_BINARY="qclient-1.4.19.1-linux-amd64"
+        QCLIENT_BINARY="qclient-$qClientVERSION-linux-amd64"
     elif [ "$OS" = "Darwin" ]; then
         NODE_BINARY="node-$VERSION-darwin-amd64"
         GO_BINARY="go1.22.44.linux-amd64.tar.gz"
-        QCLIENT_BINARY="qclient-1.4.19.1-darwin-arm64"
+        QCLIENT_BINARY="qclient-$qClientVERSION-darwin-arm64"
     fi
 elif [ "$ARCH" = "aarch64" ]; then
     if [ "$OS" = "Linux" ]; then
@@ -47,33 +130,85 @@ elif [ "$ARCH" = "aarch64" ]; then
     elif [ "$OS" = "Darwin" ]; then
         NODE_BINARY="node-$VERSION-darwin-arm64"
         GO_BINARY="go1.22.4.linux-arm64.tar.gz"
-        QCLIENT_BINARY="qclient-1.4.19.1-linux-arm64"
+        QCLIENT_BINARY="qclient-$qClientVERSION-linux-arm64"
     fi
 fi
 
+get_os_arch() {
+    local os=$(uname -s | tr '[:upper:]' '[:lower:]')
+    local arch=$(uname -m)
+
+    case "$os" in
+        linux|darwin) ;;
+        *) echo "Unsupported operating system: $os" >&2; return 1 ;;
+    esac
+
+    case "$arch" in
+        x86_64|amd64) arch="amd64" ;;
+        arm64|aarch64) arch="arm64" ;;
+        *) echo "Unsupported architecture: $arch" >&2; return 1 ;;
+    esac
+
+    echo "${os}-${arch}"
+}
+
 # Step 4:Update qClient
-echo "Updating qClient"
-sleep 1  # Add a 1-second delay
-cd ~/ceremonyclient/client
-rm -f qclient
-wget https://releases.quilibrium.com/$QCLIENT_BINARY
-mv $QCLIENT_BINARY qclient
-chmod +x qclient
+
+# Get the current OS and architecture
+OS_ARCH=$(get_os_arch)
+
+# Base URL for the Quilibrium releases
+BASE_URL="https://releases.quilibrium.com/qclient-release"
+
+# Fetch the list of files from the release page
+FILES=$(curl -s $BASE_URL | grep -oE "qclient-[0-9]+\.[0-9]+\.[0-9]+(\.[0-9]+)?-${OS_ARCH}(\.dgst)?(\.sig\.[0-9]+)?")
+
+# Change to the download directory
+cd ~/ceremonyclient/node
+
+# Download each file
+for file in $FILES; do
+    echo "Downloading $file..."
+    wget "https://releases.quilibrium.com/$file"
+    
+    # Check if the download was successful
+    if [ $? -eq 0 ]; then
+        echo "Successfully downloaded $file"
+    else
+        echo "❌ Error: Failed to download $file"
+        echo "Your node will still work, but you'll need to install the qclient manually later if needed."
+    fi
+    
+    echo "------------------------"
+done
+
+        chmod +x qclient*
+        echo "✅ qClient binary downloaded and configured successfully."
+
+echo
 
 # Get the current user's home directory
 HOME=$(eval echo ~$HOME_DIR)
 
 # Use the home directory in the path
 NODE_PATH="$HOME/ceremonyclient/node"
-EXEC_START="$NODE_PATH/release_autorun.sh"
+EXEC_START="$NODE_PATH/$NODE_BINARY"
 
-# Re-Create Ceremonyclient Service
-echo "⏳ Re-Creating Ceremonyclient Service"
+# Step 6:Create Ceremonyclient Service
+echo "⏳ Creating Ceremonyclient Service"
 sleep 2  # Add a 2-second delay
-SERVICE_FILE="/lib/systemd/system/ceremonyclient.service"
-if [ ! -f "$SERVICE_FILE" ]; then
-    echo "📝 Creating new ceremonyclient service file..."
-    if ! sudo tee "$SERVICE_FILE" > /dev/null <<EOF
+
+# Check if the file exists before attempting to remove it
+if [ -f "/lib/systemd/system/ceremonyclient.service" ]; then
+    # If the file exists, remove it
+    rm /lib/systemd/system/ceremonyclient.service
+    echo "ceremonyclient.service file removed."
+else
+    # If the file does not exist, inform the user
+    echo "ceremonyclient.service file does not exist. No action taken."
+fi
+
+sudo tee /lib/systemd/system/ceremonyclient.service > /dev/null <<EOF
 [Unit]
 Description=Ceremony Client Go App Service
 
@@ -84,37 +219,21 @@ RestartSec=5s
 WorkingDirectory=$NODE_PATH
 ExecStart=$EXEC_START
 KillSignal=SIGINT
-TimeoutStopSec=30s
+TimeoutStopSec=75s
 
 [Install]
 WantedBy=multi-user.target
 EOF
-    then
-        echo "❌ Error: Failed to create ceremonyclient service file." >&2
-        exit 1
-    fi
-else
-    echo "🔍 Checking existing ceremonyclient service file..."
-    # Check if the required lines exist and if they are different
-    if ! grep -q "WorkingDirectory=$NODE_PATH" "$SERVICE_FILE" || ! grep -q "ExecStart=$EXEC_START" "$SERVICE_FILE"; then
-        echo "🔄 Updating existing ceremonyclient service file..."
-        # Replace the existing lines with new values
-        sudo sed -i "s|WorkingDirectory=.*|WorkingDirectory=$NODE_PATH|" "$SERVICE_FILE"
-        sudo sed -i "s|ExecStart=.*|ExecStart=$EXEC_START|" "$SERVICE_FILE"
-    else
-        echo "✅ No changes needed."
-    fi
-fi
 
 # Start the ceremonyclient service
 echo "✅ Starting Ceremonyclient Service"
 sleep 2  # Add a 2-second delay
 sudo systemctl daemon-reload
 sudo systemctl enable ceremonyclient
-sudo service ceremonyclient start
+sudo systemctl start ceremonyclient
 
 # See the logs of the ceremonyclient service
 echo "🎉 Welcome to Quilibrium Ceremonyclient v$VERSION"
 echo "⏳ Please let it flow node logs at least 5 minutes then you can press CTRL + C to exit the logs."
-sleep 5  # Add a 5-second delay
+sleep 2  # Add a 2-second delay
 sudo journalctl -u ceremonyclient.service -f --no-hostname -o cat

update/updateDocker.sh

@@ -1,9 +1,9 @@
 #!/bin/bash
 
 # Step 0: Welcome
-echo "This script is made with ❤️ by 0xOzgur.eth"
 
-echo "⏳Enjoy and sit back while you are upgrading your Quilibrium Node to v1.4.21.1!"
+echo "This script is made with ❤️ by 0xOzgur"
+echo "⏳Enjoy and sit back while you are upgrading your Quilibrium Node to v2.0!"
 
 echo "⏳Processing..."
 sleep 10  # Add a 10-second delay
@@ -13,7 +13,7 @@ service ceremonyclient stop
 
 # Step 1:Download Binary
 
-echo "⏳ Downloading New Release v1.4.21.1"
+echo "⏳ Downloading New Release v2.0"
 
 cd  ~/ceremonyclient
 git pull
@@ -23,7 +23,7 @@ git checkout release-cdn
 echo "⏳Building Ceremonyclient Container"
 sleep 2  # Add a 2-second delay
 
-docker build --build-arg GIT_COMMIT=$(git log -1 --format=%h) -t quilibrium -t quilibrium:1.4.21.1 .
+docker build --build-arg GIT_COMMIT=$(git log -1 --format=%h) -t quilibrium -t quilibrium:2.0 .
 
 
 # Step 8:Run Ceremonyclient Container

visibility_check.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 
 # Step 0: Welcome
-echo "This script is made with ❤️ by 0xOzgur.eth @ https://quilibrium.space"
+echo "This script is made with ❤️ by 0xOzgur @ https://quilibrium.space"
 echo "⏳You need GO and grpcurl installed and configured on your machine to run this script. If you don't have them, please install and configure grpcurl first."
 echo "You can find the installation instructions at https://docs.quilibrium.space/installing-prerequisites"
 echo "⏳Processing..."